SUZHOU PICA ALUMINUM INDUSTRY LTD.

1. In the cooperation with many well-known LED lighting manufacturers at home and abroad, we have summarized a set of professional and mature experience of production and development in the field of LED profiles;2. Through optimizing the mold design and alloy composition, our company has the ability to produce ultra-thin lamps profiles, with the minimum wall thickness up to 0.5mm, the weight of 0.05kg/m, and the maximum width to thickness ratio up to more than 100;3. Products can be processed with various surface treatments, such as anodizing, electrophoresis,powder coating, etc.;4. Rhine is able to produce products like T4, T6, T8, panel light frame, etc.Product Manual→

1. Rhine has the ability to develop and produce various kinds of heat sink profiles, such as: direct extrusion heat sink, relieving heat sink;2. The relieving heat sink Rhine produced with strips thin to 0.3mm, pitch dense to 1.7mm, and whole length over 1m;3. Cooperating with CNC machines, plastic components injection and other capabilities, Rhine can meet  customer requirements for various kinds of finished products.Product Manual→

1.  Rhine’s R & D department explored optimization solutions, solving the problems such as difficult assembly of rear finished products and abnormal operation sound, to enable the accuracy meet requirements of such products；2. Through upgrade of mold design and extrusion process, Rhine solved the problem of black wire welding on the surface of medical device products.Product Manual→

1. Rhine is experienced in producing the material of 6061/6082/7003, 7004/7N01；2. The alloy composition Rhine used has been optimized through many experiments, which not only meets the formability of complex structure profiles,but also exceeds the performance requirements stipulated by national standards,and solves the problems of difficult molding and low performance of aviation aluminum products produced by conventional enterprises；3. For some products with complex wide and arc surface, Rhine can meet customer requirements through  out - line shaping.Product Manual→

1. By optimizing die design, reducing pressure and accelerating speed, Rhine could meet the production requirements of various multi-cavity, thin-wall thickness and high-strength assembly line profiles;2. Through majorizing alloy ratio, profiles produced by Rhine has higher strength and superior surface treatment performance. The tensile performance of the conventional 6063 assembly line profile can reach 260Mpa, far exceeding the national standard and peer level；3. The highest flatness of the guide rail profile with complex structure can reach 0.5mm/2m through the mold secondary welding and sinking bridge process, with advanced tensile straightening technology, which also can shorten the cutting process, and reduce the material cost greatly.Product Manual→

1. To meet high surface requirements of the home furnishing industry, Rhine has developed the 6063R alloy composition by optimizing the ratio of elements Si and Mg and adding special elements, to make the profile produced by this alloy have bright appearance with no impurities, and superior surface treatment performance;2. To meet market demand, Rhine is also equipped with advanced anodizing production lines, which can do various surface treatment, such as: bright oxidation of various colors, alkali sand oxidation, sandblast oxidation, electrophoresis, etc.;3. Rhine’s oxidation products have uniform film thickness and fine sand surface. Their abrasion resistance and weather resistance are far exceeding the national standard.Product Manual→

1. Possess the industry's advanced Taiwan Mei Ruey extruder and auxiliary equipment, and with high degree of automation, stable performance, Rhine can meet most of the production processes of aluminum profiles for traditional automobiles and new energy vehicles;2. Rhine’s heat treatment capability includes F, T1, T4, T5, T6, T66, etc;3. With IATF 16949 quality management system certification, Rhine also owns a professional technology, production, and quality team to ensure the product development process and product quality.Product Manual→

1. The mold secondary welding and bridge sinking process reduces extrusion pressure and improves the production capacity of porous profiles;2. The development of porous profiles reduces the meter weight of the profiles under the same load design and saves production costs;3. Supporting oxidation and spraying production lines in our company can meet the needs of diversified surface colors of elevator products.Product Manual→

1. Rhine has decades of experience in the production of ladder profiles, and has a professional technical team to provide customers with one-stop ladder product solutions;2. Through independent researching and developing of a variety of alloys such as 6063R, 6063T, etc. for ladder products,  currently Rhine can produce ladder profiles with high strength and excellent surface treatment for customers;3. Through mold design and extrusion software simulation, Rhine can produce decking profiles with a width-to-thickness ratio of 150.Product Manual→